A family business established in 1950
Hot Air Rubber Melters
Standard Hot Air Rubber Melters
Rubber materials are supplied by companies such as Radmat, Iko, and Bauder and are used mainly on roofing projects
across the country.
Manual Agitation
½ & 1 Drum Gas-fired Hand Stirred melters
110-Volt Electric Agitation
1-4 Drum 110 Volt Electric Drive - Gas-fired melters.
1½ Drum 3-Phase Fully electric models.
Non-agitated Melter
160 Litres Hot Air Rubber Gas-fired Melter.
1 Drum capacity Hand Stirred Model
2 Drum 110 volt Model
3 Drum 110 volt model
1.5 Drum Electric model
Additional Information
•
All models are made to order only.
•
Training is available in the correct use of this equipment.
•
Service Contracts are available.
1-5 Drum Gas-fired Hot Air Melter
Non-Agitated Gas-fired Hot Air Melter
½ - 1 Drum Hand Agitated Gas-fired Hot Air Melter
3 drum 3-Phase Electric Melter
1.5 Drum 3-Phase Electric Melter
½ - 1 Drum Hand Agitated Hot Air Melter
1 Drum Electric agitated Melter
1.5 Drum Electric agitated Melter
2 Drum Electric agitated Melter
3 Drum Electric agitated Melter
4 Drum Electric agitated Melter
110 Gallon Hot Air Melter Non-Agitated
Questions we are often asked.
Why is the capacity of a Hot Air Melter not as it seems?
The rubber materials melter capacity has always been measured as drums. The original
drums were said to be ‘45-US gallon’ capacity; an imperial gallon is a larger entity plus the
material was not poured into the drums, the drums were filled with 8 pieces of solid
material, ‘pan cakes’.
A solid material placed inside a drum will never provide the capacity of that drum, unlike
if provided in liquid form.
>
